KUSSMAUL 091-7 Instruction Manual

Automatic battery charger

Download this manual

MAINTENANCE MASTER

AUTOMATIC BATTERY CHARGER

INPUT : 115 volt, 50/60 Hz, .75 amp

KUSSMAUL ELECTRONICS CO., INC

170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796-1221

TEL: in NY 631-567-0314

631-567-0314

INSTRUCTION MANUAL

MODEL #091-7-xx

NOTE :

This charger is designed for

vehicles with a single

battery system

3 YEAR WARRANTY

TOLL FREE: 800-346-0857

800-346-0857

FAX: 631-567-5826

FILE: 091-7-xx.PM7.0

6/4/2004

631-567-5826

Page 1 This charger is designed for vehicles with a single battery system INPUT : 115 volt, 50/60 Hz, .75 amp 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO., INC 170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796-1221 TEL: in NY 631-567-0314 631-567-0314 631-567-0314 631-567-0314...
Page 2: Electrical Connections
1. INTRODUCTION This procedure defines the installation and wiring for the 091-7-xx Maintenance Master Bat- tery Charger. 2. MOUNTING Mount the Maintenance Master Charger at some convenient location near the battery utilizing two #8 x 1 screws provided. Mounting against a vertical wall is suggested, be certain that the upper and lower surfaces of the charger are unobstructed to permit free circulation of air.
Page 3 4. CHARGER OUTPUT The charger is calibrated to put out the voltage as follows: Model Number Nominal Voltage Charger Output Voltage 091-7-6 6 volts 6.70 +/- .05 volts 091-7-12 12 volts 13.25 +/- .1 volts...
Page 4: Installation & Wiring
INSTALLATION WIRING...
Page 5 Kussmaul Electronics Company, Inc. shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. products. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others.

Maintenance master 091-7-6Maintenance master 091-7-12Maintenance master 091-7-24