Remote Control; Introduction - DirecTV DTV-MD0-0058 Information For The Installer

DIRECTV Set-top box information for the installer

6 Remote Control

6.1 Introduction

There are two universal remotes designed by UEI for use with the D10 and H10 STBs. One is
the standard IR universal remote, model RC 23, which comes with each D10. The D10 only
accepts IR commands. The other is the IR/RF universal remote, model RC24, which comes with
the H10. The H10 accepts both IR and RF signals. Both remotes look the same as shown in
Figure 5 with the exception of the FORMAT key which is only found on the RC24.
The following sections list the DIRECTV remote control key codes for IR emitters used to
control the STB. Also included are the brand setup code list used for setting up the remote to
control the TV and auxiliary devices. It is the same code list found within the STB user
interface.
DIRECTV Proprietary November 17, 2005
Version 1.1.a Page 29 of 49 DTV-MD-0058