Hughes DIRECTV HIRD-B1 Owner's Manual page 22

HUGHES-BRAND DIRECTV SYSTEM OWNER'S MANUAL
If you decide to install the antenna yourself, we recommend you purchase the Do-It-Yourself
Instillation Kit. It contains many items you will need to complete most installations.
You will need some of the following tools, depending on your installation:
Electric drill
Drill bits (1/8-inch,
3/16-inch, 1/2-inch
masonry)
Carpenter's level
Pencil or chalk
Confirm that you have all of the antenna kit components. Since the dish may be one of three
possible models, compare the parts list associated with your antenna model.
Steel reflector (1)
Mast (1)
Base plate (1)
LNB support arm (1)
LNB (1)
If you are missing any parts contact the Customer Care Center at 1-800-274-8995.
P 4-4
AGE
Tape measure
Wrenches (3/8-inch,
7/16-inch, or
adjustable)
Hammer
Hole digging tools
¼-inch nuts (5)
Star washer (1)
Retainer screw (1)
Cable clip (1)
Flat head screws (4)
Wheelbarrow or
concrete mixing box
Hacksaw
Sledge hammer
Flat blade screwdriver
Phillips screwdriver
¼-20 x ½-inch
grounding bolt (1)
Flat washer (1)