How To Install The Projector Using The Tripod; Kensington Security System - LG HS201 - LED Projector Slim Line Design Just 1.8 Lbs Owner's Manual

Owner's manual

Hide thumbs Also See for HS201 - LED Projector Slim Line Design Just 1.8 Lbs:

Table of Contents

How to install the projector using the tripod

* You can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera

tripod.

* When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5mm or less.The maximum size

allowed for the locking bolt is 6.5mm.(If it is longer than the maximum allowed size, it may damage the projector.)

Part connected to the tripod

Bottom side of Projector

• This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System

cable as below.

• For the detailed installation and use of the Kensington Security System, refer to the user's guide included with the

Kensington Security System set. And for further information, contact http://www.kensington.com, the internet homepage

of the Kensington company that deals with expensive electronic equipment such as notebook PCs or projectors.

• The Kensington Security System is an optional item.

Part connected to the projector

Camera Tripod

Installing and Composition

Finished condition when projector is install on the tripod

Table of Contents

Hs200 Hs201g Hs200g