Table of Contents
Advertisement
Function
* The On-Screen Display (OSD) in this manual may be slightly different from your projector.
* This operating guide explains operation of RGB(PC) mode mainly.
Video Menu Options
Adjusting Video
1. Press the MENU button and then use
2. Press the
button to select a video item you want to adjust.
,
3. Press the
button to adjust the screen condition as you want.
,
G
Each adjustment of
As required, re-adjust
G
To restore the original image condition after changing it, press
after selecting [Reset] item.
G
Tint is adjustable only with a NTSC signal (60Hz only).
G
You can adjust contrast by pressing the
G
You can adjust brightness by pressing the
G
Press the MENU button twice or the EXIT button to exit the menu screen.
Picture mode
* Use the Picture mode function to set the projector for the best picture appearance.
* This function does not work in RGB or HDMI mode.
1. Press the MODE button on the remote control.
2. Press the
button to toggle through the preset picture settings.
,
G
Each press of the
,
Clear
G
You can use this function through the MENU button.
G
To exit the menu display, press the EXIT button.
button to select the
,
menu options will only affect the current source input.
menu options for the input sources.
button on the remote control.
button on the remote control.
button changes the screen as shown below.
Soft
menu.
Contrast
Brightness
Color R
Color G
Color B
Reset
MENU
OK button
Picture mode
Contrast
Brightness
Color
Sharpness
Tint
MENU
User
Function
< RGB mode >
50
50
50
50
50
Exit
Move
OK
< Video mode >
Clear
80
50
50
50
0
Exit
Move
OK
19
Advertisement
Table of Contents
