Table of Contents
Advertisement
5.3.3
Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You
may initialize the logical drives of a RAID set(s) using the Initialize or
Objects command in the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
1.
From the Management Menu, highlight Initialize, then press <Enter>.
2.
The screen displays the available RAID set(s) and prompts you to
select the logical drive to initialize. Use the arrow keys to select the
logical drive from the Logical Drive selection, then press <Enter>.
5-22
Chapter 5: Driver installation
Advertisement
Table of Contents
