Unlocking/Disarming; Disabling The Optional Starter Kill Without A Transmitter - Directed Electronics Avital 3200 Owner's Manual

Directed avital 3200 owner's guide

Table of Contents

NOTE: For Passive Mode to be effective, the Failsafe

must be installed.

Unlocking/Disarming

Pressing

for one second disarms the system and unlocks the

doors (if connected). The horn will honk twice (if connected) and

the parking lights will flash twice to confirm disarming of the sys-

tem. The optional Failsafe

tus LED will turn off, unless the system is programmed for Passive

Mode. In Passive Mode, the status LED will flash rapidly when the

system is disarmed. This indicates that the system will re-engage

the optional starter kill and re-lock the doors (if Passive Locking

has been programmed) in 30 seconds unless the ignition is turned on.

If your remote transmitter is lost or damaged, you can manually

override the optional starter kill. To do this, you must have the ve-

hicle's ignition key and know where the Valet

sure to check with the installer for the location of the Valet

To override the optional starter

kill, turnthe ignition on and

press the Valet

seconds. The status LED will stop

flashing and the vehicle should start. If it does not start, you may

have waited too long; turn the ignition off and repeat the process.

LOCATION OF VALET

2000 Directed Electronics, Inc.

Starter Kill will be deactivated. The sta-

switch within 10

SWITCH_____________________________

Starter Kill relay

switch is located. Be

switch.

DRW-35

Table of Contents