Scanning From Onetouch; Load And Scan Documents From The Input Tray - Visioneer PATRIOT 480 SCANNER User Manual

24 V P
ISIONEER ATRIOT
480 S U ' G
CANNER SER S UIDE
Scanning from
OneTouch
With powerful features such as scanning with VRS and to searchable PDF
at the touch of a button, OneTouch is the main interface for using the
scanner and accessing these features.
L S
OAD AND CAN
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The scanned
images are then sent to a software application or location (known as the
Destination Application) on your computer.
Note: Always remove any staples or paper clips from documents before
inserting them into the scanner's Automatic Document Feeder. Staples
and paper clips can jam the feed mechanism and scratch the internal
components. Also remove any labels, stickers, or Post-It™ notes that
may come off during the scanning process and get stuck in the scanner.
Misuse as described here will void your scanner's warranty.
1. Adjust the paper guide for the width of the paper, and make sure the
output tray is fully extended.
D
OCUMENTS FROM THE
I T
NPUT RAY