Table of Contents
Advertisement
Troubleshooting
I can't connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless
computer, please check the following items:
1.
L ook at the lights on your wireless router. If you're using a
Belkin Wireless Router, the lights should be as follows:
• The "Power" light should be on.
• The "Connected" light should be on, and not blinking.
• The "WAN" light should be either on or blinking.
If your Belkin Wireless Router's lights match these descriptions,
go to number
If this is NOT the case, please contact Belkin technical support .
If you are not using a Belkin Wireless Router, consult that router
manufacturer's user guide .
2.
Open your Wireless Networking Utility (WNU) software
by clicking on the icon in the system tray at the bottom
right-hand corner of the screen; the tray icon should look
like this (the icon may be red or green):
3.
The Belkin WNU will show a list of "Available Networks" .
Available networks are wireless networks to which you
can connect .
If you are using a Belkin 802 .11g (54g) Router, "Belkin54g" is the
default name .
If you are using a Belkin 802 .11b Router, the default name should
be "WLAN".
If you are NOT using a Belkin Router, please consult your router
manufacturer's user manual for the default name .
2
, below .
35
1
2
3
4
5
6
7
Advertisement
Table of Contents
