Replace - Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Manual

replace

Usage
Description
Usage Guidelines
Related Topics
Copyright © 2010, Juniper Networks, Inc.
<rpc>
<load-configuration action="replace">
<configuration>
<!-- opening tag for each parent of the element -->
<container-tag replace="replace">
<name>identifier</name>
<!-- tag elements for other children, if any -->
</container-tag>
<!-- closing tag for each parent of the element -->
</configuration>
</load-configuration>
</rpc>
Specify that the configuration element completely replace the element in the candidate
configuration that has the same identifier (in the Usage section, the identifier tag element
is called ). If the attribute is omitted, the Junos XML protocol server merges the
<name>
element with the existing element as described in "Merging Configuration Elements" on
page 110. The only acceptable value for the attribute is
The client application must also include the
tag.
<load-configuration>
The replace attribute can be combined with either the
described in "Changing a Configuration Element's Activation State Simultaneously with
Other Changes" on page 127.
See "Replacing Configuration Elements" on page 113.
active on page 183
inactive on page 186
<load-configuration> on page 168
<rpc> on page 176
Chapter 8: Summary of Attributes in Junos XML Tags
.
replace
attribute in the opening
action="replace"
active or inactive attribute, as
199