Light Bulb Replacement - Dimplex Optiflame Electric Fireplace User Manual

MAINTENANCE
WARNING
•
Disconnect all power coming to fireplace
at main service panel before attempting
any maintenance or cleaning to reduce risk
of fire, electric shock or damage to
persons

Light Bulb Replacement:

NOTE
•
Allow at least 5 minutes for light bulbs to
cool off before touching bulbs to avoid
accidental burning of skin.
Light bulbs need to be replaced when you notice a
dark section of the flame of when the clarity.
There are four bulbs under the log set which
generate the flames and embers.
Tool Requirements: Slot Screw Driver
Bulb Requirements: Quantity of 4 clear
chandelier or candelabra bulbs with an E-12
(small) socket base, 60 watt rating. Example: GE
60BC or Philips 60CTC.
CAUTION
•
Do not exceed 60 watts per bulb.
•
When handling log only apply force to the
ember bed section not directly to the logs.
Helpful Hints
It is a good idea to replace all light bulbs at one
time if they are close to the end of their rated life.
Group replacement will reduce the number of
times you need to open the unit to replace light
bulbs. Long life bulbs are recommended to reduce
the frequency of bulb changes.
5