Advanced Options; Dynamic Custom Workstation Groups; Wake-On-Lan Across Subnets; Wake-On-Lan Web Interface - FARONICS POWER SAVE Manual

Hide thumbs Also See for POWER SAVE:

Table of Contents

Advanced Options

The following advanced options can be used with Power Save:

•

•

•

Dynamic Custom Workstation Groups

In a scenario where you have multiple managed workstations, Faronics Core provides a feature to

create Dynamic Custom Workstation Groups. This feature allows you to create workstation groups

and dynamically update the workstation list based on predefined parameters.

Dynamic Custom Workstation Groups can be created based on the different departments in your

organization, physical locations, and user groups.

For more information on Dynamic Custom Workstation Groups, refer to the Faronics Core User

Guide available at http://www.faronics.com/library.

Wake-on-LAN Across Subnets

In a scenario where Wake-on-LAN (WOL) broadcast packets cannot always cross routers and

other networking equipment and therefore cannot always wake up workstations on remote

subnets, it is possible to designate one or more workstations as WOL relays.

When Core Console attempts to wake up a workstation on a remote subnet, it contacts a WOL

relay on that subnet, using it to re-broadcast the wake up message on the target subnet.

For more information on Wake-on-LAN Across Subnets, refer to the Faronics Core User Guide

available at http://www.faronics.com/library.

Wake-on-LAN Web Interface

In a scenario where Power Save is managing power on workstation(s), the Wake-on-LAN Web

Interface allows you to wake up the workstations. The workstation(s) can be woken up remotely

after logging on to the corporate Virtual Private Network (VPN).

For more information on Wake-on-LAN Web Interface, refer to the Faronics Core User Guide

available at http://www.faronics.com/library.

Advanced Options

Faronics Power Save User Guide

Table of Contents