Table of Contents
Advertisement
3.
In the Copy File dialog box, select Copy File and in the Source path dialog box, select the
DFC.exe file you want copied to the workstation, and in the Destination path box, type
the location you want it located on the workstation. We recommend you put it in the C:\
Windows\System32 folder since this location is already mapped.
4.
Click OK
The DFC.exe file is transferred to the workstation. Once file is transferred you can start
using DFC command on the workstations.
Controlling Deep Freeze with DFC command
The following procedure provides an example of controlling a workstation using the DFC command,
by thawing a workstation.
You can thaw a workstation in three ways:
1.
From the Deep Freeze Console, select the machine in the workstations pane, and select Reboot
Thawed.
2.
On the local machine, shift+double-click the Deep Freeze icon, enter the Customization Code,
and thaw the machine.
3.
Using the DFC command remotely, as described in the following procedure.
1
Advertisement
Table of Contents
