An Error Message Is Displayed While Using The Photo Viewer - Canon 900D - i Color Inkjet Printer Printing Manual

An Error Message is Displayed While Using the Photo Viewer

If one of the following messages appears while using the Photo Viewer, printing may be disabled or the
Photo Viewer may be terminated forcibly.
Error Massage
Executing maintenance.
Insert a memory card.
The printer's card slot has
been write-enabled. ......
There is a problem with the
memory card or it is not
inserted. ......
Insufficient disk space. ......
Insufficient memory. ......
A digital camera is
connected to the printer.
......
Failed to communicate
with the printer. ......
Failed to print. ......
An internal error (code =
nnnn) occurred. ......
(n: Alphanumeric
character)
46
Printing cannot be done in the maintenance mode.
Insert a memory card after checking its orientation.
See "Using a Memory Card" on page 6.
If a memory card has already been inserted, remove it and then insert
it again. Next, check that the Indicator lamp stays on.
The memory card utility started on the computer has write-enabled the
card slot. When the card slot is write-enabled, the printer cannot print
images.
When you have finished writing data to the card, cancel the write-
enable mode. For the cancellation procedure, see "Setting up the Card
Slot as the Memory Card Drive of the Computer" on page 29.
The memory card is inserted incorrectly.
Insert the memory card after checking its orientation. See "Using a
Memory Card" on page 6.
If a memory card has already been inserted, remove it and then
insert it again. Next, check that the Indicator lamp stays on.
The memory card cannot be read.
Image data edited/processed on the computer must also be printed
from the computer.
The hard disk of the computer does not have a sufficient free space.
Delete unnecessary files on the hard disk to create a sufficient free
space, then start the Photo Viewer again.
The computer does not have sufficient free memory. Close some
applications or increase virtual memory, then start the Photo Viewer
again.
Printing from a computer or the operation panel cannot be done when
a digital camera or digital video camcorder is connected to the printer.
After completion of operation from the digital camera, disconnect the
connection cable.
The computer cannot communicate with the printer.
Check whether the cable is connected securely between the printer
and computer.
Turn the printer off and on again, then start the Photo Viewer again.
An unexpected error occurred during printing.
Turn the printer off and on again.
An internal error occurred.
Turn the printer off and on again, then start the Photo Viewer again.
If the same error persists, reboot the computer and then start the Photo
Viewer again.
Try This