Setting Kitchen Timer; To Set Add 1 Minute Feature - Kenmore 4813 - Elite 30 in. Double Wall Oven Use & Care Manual

Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
The KITCHEN TIMER _ and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving
features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the
oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
1. Press and hold _ for 7 seconds (Fig. 1). After 10 seconds
"12h" or "--h" will appear in the display and the control will
beep once (Fig 2 or 3).
2. Press @ to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Fig. 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "==h" indicates the control is set for the Continuous
Bake feature (Fig. 3).
3. Press _ to accept the change (Fig. 4; display will return to
day) or
press
_) to reject the change. time
of
PRESS DISPLAY
for 10 seconds
@
Setting Kitchen Timer
The KITCHEN TIMER _ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be
used during any of the other oven control functions, except during a self-clean operation. Refer to "Minumum and
Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS
To set the Kitchen Timer (example: 5 minutes)
(Fig. 5).
1. Press
2. Press the number pads to set the desired time in the display
(example (_). Press (_. The time will begin to count
down in the display (Fig. 6). Note: If _ is not pressed the
timer will return to the time of day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Fig. 7). The clock will sound with 3 beeps every 7
seconds until _ is pressed.
To cancel the Kitchen Timer before the set time has
run out
Press _. The display will return to the time of day.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
PRESS DISPLAY
Fig. 6
@
Fig. 7
To Set Add 1 Minute Feature
The @ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the @ pad is pressed, 1 minute is
added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the
pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. For further
information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.