Routing - D-Link DIR-501 User Manual

Section 3 - Configuration
This option allows you to define fixed routes to defined destinations.
Tick this checkbox to enable or disable fixed
Enable:
routes to defined destinations.
Use the drop-down menu to choose the WAN or
Interface:
WAN (Physical Port) Interface the IP packet must
use to transit out of the Router.
The IP address of the packets that will take this
Destination:
route.
The subnet of the IP address of the packets that
Subnet Mask:
will take this route.
Specifies the next hop to be taken if this route is
Gateway:
used.
D-Link DIR-615 User Manual

Routing

40