Cisco 5580-40 - ASA Firewall Edition Hardware Installation Manual page 10

Short-Circuit Protection Warning
Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Compliance with Local and National Electrical Codes Warning
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
TN Power Warning
The device is designed to work with TN power systems. Statement 19
Warning
Multiple Power Cord
Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit,
disconnect the power cord of the power strip that the unit is plugged into. Statement 137
Circuit Breaker (15A) Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the
phase conductors (all current-carrying conductors). Statement 13
Grounded Equipment Warning
This equipment is intended to be grounded. Ensure that the host is connected to earth ground during
Warning
normal use. Statement 39
Safety Cover Requirement
The safety cover is an integral part of the product. Do not operate the unit without the safety cover
Warning
installed. Operating the unit without the cover in place will invalidate the safety approvals and pose
a risk of fire and electrical hazards. Statement 117
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
x
About This Guide
OL-12920-01