Kurzweil PC2KBD Musician's Manual page 105

FXA/B Select
This parameter appears only when the current effect is one of the double-block KB3 effects. It
selects the menu of parameters for the FX-AB block. The effect ID and name appear, enabling
you to select an effect for FX-AB, or to view/edit the four FX-AB parameters by pressing > one
or more times.
Effect ID and Name
The display doesnÕt show you the names of these parameters, as it does with most other
parameters. Instead, youÕll see
current effect block). This parameter appears when you press the Select button for either FX-A
or FX-B, enabling you to select an effect for the current effect block, or to view/edit the current
effect blockÕs four parameters by pressing > one or more times.
Parameters for Current Effect—Variable
Select these parameters by pressing > one or more times after pressing the Select button for
either FX-A or FX-B. The parameters you see are determined by the current effect.
Effects Change Mode (FX Chg Mode)
Determines how the PC2 selects effects when you select a program or setup. Select this
parameter by pressing the FX Mode button while in any performance mode, or while in the
MIDI Recv menu. There are two possible values:
Auto
The PC2 selects the effect associated with whatever programs you select while in Internal Voices
mode or KB3 mode; it selects the effect associated with whatever setup you select while in MIDI
Setups mode.
Panel
The PC2 ignores the effects associated with whatever program or setup you select. Select effects
from the front panel by pressing the Select button for either FX-A or FX-B, then use any data
entry method to change the current effect. This effect gets applied to every program or setup
you select, regardless of performance mode.
Effects Channel (FX Channel)
Affects how the PC2 handles effects when you change programs. This parameter is closely
related to the FX Chg Mode parameter.
FX Chg Mode is Auto; FX Channel is Current
These are the default settings for both parameters, and provides the most useful model for
managing effects. In this case, program changes on the channel used by the program in the
display (or program changes on the channel used by Zone 1 of the setup in the display) also
change the current effect. This is true for internal program changes as well as those received via
MIDI. Programs on all other channels use the current effect, but retain their own settings for
wet/dry mix.
FX Chg Mode is Auto; FX Channel is 1–16
Program changes on the channel designated as the FX channel (or program changes in the setup
zone that uses the FX channel) change the current effect. This is true for internal program
FXA|Select in the top line (or
Descriptions of Parameters
Effects Editor Parameters
FXB or FXAB , depending on the
5-25