Bug Fixes Since Version 1.0 - Kurzweil PC2KBDV2 Supplement Manual

Miscellaneous New Features
Changing EQ Levels with the Alpha Wheel
You can now go to the EQ settings from any performance mode (by pressing the EQ button),
then use the Alpha Wheel to change the level of the currently selected frequency band.
Previously, this feature didn't work in some performance modes.
KB3 Drawbar Response
It's smoother. It's faster.

Bug Fixes Since Version 1.0

Battery Level
This fix was introduced in Version 1.5. With Version 1.0, you might see a "Low Battery" message
when starting up the PC2, even though the battery level is fine. With Version 2, you won't see a
"Low Battery" message unless the battery level is actually low.
If you've seen a "Low Battery" message on your instrument prior to installing Version 2, you
may not need to replace the battery. After installing Version 2, watch the display when you turn
on your PC2. If you don't see the message, your battery is fine.
Cancel Button
In some editing menus, the Cancel button would not cancel values added from the
alphanumeric buttonpad. This has been fixed. This fix was first introduced in Version 1.5.
Compare Mode
If you don't have enough memory and you try to use Compare mode, you'll see this message:
Not|enough|memory|to|compare
Version 1.0, if you tried to use compare mode and you didn't have enough memory, it didn't
work, and there was no message indicating the problem.
The wet/dry mix display for setups now works properly in Compare mode.
Compare mode now works when you're creating quick layers and splits.
Goto Setup
The MIDI Controller "Go to Setup" now selects setups in the User bank of setups (Setups
129–256). Previously, it selected setups in the Internal back, which prevented you from using
"Go to Setup" to select user-defined setups.
To use a switch controller to change setups, remember to set its On Value parameter to a value
that's 128 less than the ID of the setup you want to select. For example, if you want to select
Setup 129, set an On Value of 1. To select Setup 256, set an On Value of 128.
PC2 Version 2 Operating System Software
. This fix was first introduced in Version 1.5. In
Bug Fixes Since Version 1.0
9