Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 16 Function Manual page 28

DSP Functions
The DSP Functions
The Fine Adjust parameter gives you one-cent precision in setting the center frequency.
EditProg:F2|WID(PARA|EQ)|||<>Layer:1/1||
Adjust:0.010oct|||||Src1||:OFF||||||||||
||||||||||||||||||||Depth|:0.00oct||||||
||||||||||||||||||||Src2||:OFF||||||||||
KeyTrk:0.000oct/key|DptCtl:OFF||||||||||
VelTrk:0.00oct||||||MinDpt:0.00oct||||||
||||||||||||||||||||MaxDpt:0.00oct||||||
<more||F1|FRQ|F2|WID|F3|AMP|F4|AMP|more>
Parameter
Adjust
Key Tracking
Velocity Tracking
Source 1
Source 1 Depth
Source 2
Source 2 Depth Control
Minimum Depth, Source 2
Maximum Depth, Source 2
The control-input page for the amplitude stage (F3 AMP) is identical to the AMP page described
previously, except that thereÕs no Pad parameter.
Mid-range Parametric EQ (PARA MID)
This two-stage function is almost identical to the three-stage Parametric EQ function. The only
difference is that the width of PARA MID is Þxed at 2.2 octaves. Consequently thereÕs no
control-input page for the width.
16-28
Range of Values
0.010 to 5.000 octaves
± .200 octaves per key
± 5.00 octaves
Control Source list
± 5.00 octaves
Control Source list
Control Source list
± 5.00 octaves
± 5.00 octaves