NETGEAR FSM726E - ProSafe Switch Hardware Installation Manual page 24

Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide
After you connect a console to the switch, you will need to configure the switch. The following
documents are provided for this purpose:
• Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches: Gives
detailed examples of how to use the CLI, and is located on the Resource CD.
• Administration Manual for the 7200 Series Layer-2 Switches: Describes configuration tasks,
and is located on the Resource CD.
2-8
v1.0, November 2008
Hardware Installation