Display The Time - Digital Spectrum MemoryFrame MF-8000 User Manual

Once the photo has been transferred, if the Bluetooth setting on the MemoryFrame is set to
"Prompt me", the user will be presented with a prompt to accept the photo. If set to "Accept
all pictures", the frame will automatically display the transferred photo. Press "Menu" to close
the transferred photo and return to the main menu.

Display the Time:

While the slideshow is playing, press 'Clock' on the remote control to display the current time.
To Search for other Wireless Network:
With slideshow playing:
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
Select 'Search wireless network' and press 'Enter'
A list of wireless networks will be displayed.
Select the one of your choice and press 'Enter' to connect
Enter the security key if necessary
To turn off Music if Background Music is playing:
With slideshow playing:
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
Select 'Stop music' and press 'Enter'
To set Portrait/Landscape Mode:
With slideshow playing:
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
Use 'Up' 'Down' buttons on the remote control to select 'Settings' and press 'Enter'
Use 'Up' 'Down' buttons on the remote control to select 'Frame orientation' and press 'Enter'
Select 'Landscape' or 'Portrait' and press 'Enter'
To Set the Slide Duration:
With slideshow playing:
Press 'Menu' on the remote control to go to the main menu
Or at the main menu:
MemoryFrame will automatically save connection settings for the networks which
have been previously accessed, so that the user will not need to re-enter them every
time a connection is made.
If MemoryFrame does not have the selected network cached, it will prompt the user
to specify additional information such as the type of authentication which is required
to connect to the wireless access point and an encryption key, if necessary. An on-
screen keyboard will appear so that a security key can be entered. MemoryFrame
supports connectivity to unsecured, WEP, and WPA networks.
Note: Some network management utilities allow users to enter a pass phrase to
generate a security key. MemoryFrame requires the actual security key to be
entered.
If WPA security mode is used, the pass phrase is case sensitive'
If the SSID of your wireless router is not displayed, configure your wireless router to
broadcast its SSID.