Table of Contents
Advertisement
The Print Controller
System Configuration
The PCU-1 is based on an IBM compatible PC system that includes the follow-
ing:
Intel Pentium P-200 MMX
Motherboard
PCI
ISA bus slots
Standard 72 pin SIMM & DIMM memory
IDE Hard Disk
3.5" floppy disk
VGA Video Card
A keyboard or monitor may be used for diagnostic functions of the PCU-1.
The Copier Interface Card (CIC) of the PCU-1 acts as a bridge between the
Motherboard and the Video Interface Card installed in the print engine.
The CIC board contains a Motorola 68331 CPU and custom hardware and
software for communicating with and controlling the print engine. The CIC card
can be reprogrammed in the field via a floppy disk; or through the network.
Settings
Default Settings
Default Paper Size
Default Resolution
Default Emulation
Default Printer Quality
Serial Port Parameters
Other Settings
E-RDH Print Order
Duplex
Sheet Insertion
Paper Thickness
Print Density
Finisher Mode
Letter
400 dpi
PCL 5E
Text Mode
19,200,N,8,1,Xon/Xoff
Normal
Off
Off
Normal
Engine default
Job Offset
The Print Controller 1-3
Advertisement
Table of Contents
