Kyocera Ai5555 Instruction Handbook Manual page 135

UNIX Printing Through TCP/IP
Installing
TCP/IP
Installing and Printing on SCO UNIX System (continued)
6. The script automatically starts the daemon for the newly configured
printer. It also displays the path used should you ever need to restart the
daemon. In the preceding example, the path would be:
/usr/nic/nic_print /dev/nic/printer_name printfast 10001 &
This example reflects names supplied to the script earlier. When the
installation script is complete, you must still configure the printer and make
it known to the lp system.
The SCO UNIX lp system uses the lpadmin maintenance command to
configure a printer (there is no
The specific commands to do this are:
lpadmin -p printer_name -v /dev/nic/printer_name
NOTE: Your host may require you to specify the model by using the -i command.
enable printer_name
accept printer_name
You can also use other options for the lpadmin command. See your system
documentation for details. Note that the printer name must be the same as
the one you entered during NC-2 Print Server installation.
The software installed with your SCO system can satisfy most of your
printing needs. SCO supplies ASCII-to-PostScript filters and the system
will invoke them automatically if you define the content type of the printer
as PostScript.
The SCO UNIX lp system also supplies interface scripts that produce
PostScript banners. Use the lpfilter command to define new filters and
content types if necessary. The full power and flexibility of the lp print
service is now apparent. Your printing across the network is completely
transparent.
If Not Running lpd
/etc/printcap
UNIX Printing Through TCP/IP 5-45
file).