Using Timers; Setting The Alarm Timer - Yamaha POCKETRAK 2G - 2 GB Digital Player Reference Manual

Using timers

Set the date and time before you set any timers

Setting the alarm timer

A file (or an alarm sound) can be played at a designated time. Before you program the timer,
place the file to be played in the ALARM folder
there are no files in the ALARM folder.
1.
While the unit is stopped, press the MENU/STOP button for at least two (2)
seconds.
2.
Press the Y or T button to select "COMMON", then press the W button.
3.
Press the Y or T button to select "TIMER & ALARM",
then press the W button.
4.
Press the Y or T button to select "ALARM", then press
the W button.
Note:
· If you want to cancel the alarm timer, select "CANCEL" instead, then press the W but-
ton.
5.
Press the Y or T button to specify the hour, then press
the W button.
The minute digits are highlighted.
6.
Press the Y or T button to specify the minute, then press the W button.
7.
Press the Y or T button to select the alarm sound, then
press the W button.
BEEP:
MUSIC:
8.
Press the MENU/STOP button twice to exit from the menu setting mode.
At the programmed time, the alarm timer will be activated and a file or beep will
be played through the speaker or headphones.
Beep sound
Plays the audio file in the ALARM folder.
(page 7).
(page 42). A beep will sound for 10 seconds if
POCKETRAK 2G Reference Manual
Using timers
25