Device List - D-Link DGS-1216T - Switch Product Manual

4 SmartConsole Utility
D-Link Web Smart Switch User Manual

Device List

This is the list where all Web-Smart devices on the network are discovered.
Figure 28 – SmartConsole Device List
Definitions of the Device List features:
Monitor: Check the Monitor box, and the SmartConsole will collect the trap and log data from the device.
The in the monitor means the device was discovered by SmartConsole, by single click the icon it will
become , which means this device will keep updating the information such as system log or trap to the
SmartConsole Utility. When the device was detected not reachable, the icon will change to . Please
check if the power or the cable of this device is disconnected.
IP Address: Shows the current IP addresses of devices.
MAC Address: Shows the device MAC Address.
Protocol version: Shows the version of the Utility protocol.
Product Name: Shows the device product name.
System Name: Shows the appointed device system name.
DHCP: Specify if the IP address of this device is from DHCP server or manual configured
Location: Shows where the appointed device location.
Trap IP: Shows the IP where the Trap information will be sent.
Subnet Mask: Shows the Subnet Mask setting of the device.
Gateway: Shows the Gateway setting of the device.
Device Group Interval: Shows the intervals (in seconds) that the Switch will be discovered in the
SmartConsole Device List
Firmware version: Show the current Firmware version of this device.
1 8
1 8