D-Link DGS-1210-10P User Manual page 60

5 Configuration
Profile ID: Indicates the corresponding access profile Identification number.
Access ID: Indicates the access rule Identification number.
Profile Type: Displays the profile type.
Summary: Displays the access rule summary.
Action: Displays the access rule action.
To add a new rule, click Add Rule:
Profile Information displays the information to which the rule is being added to, including Profile ID and
other fields specified.
In Rule Detail, you can specify the details of an access rule. Below are all the possible parameters that can
be set.
Access ID: Specify the Access ID (1-65535).
Type: Display the type of rule.
VLAN ID: The VLAN ID for a previously configured VLAN.
Destination MAC Address: Specify the Destination MAC address, the field of format is xx-xx-xx-xx-
xx-xx.
Source MAC Address: Specify the Source MAC address, the field of format is xx-xx-xx-xx-xx-xx.
802.1p: Specify the 802.1p priority value.
Ether Type: Specify the Ethernet Type value.
Destination IP Address: Specify the Destination IP address.
Source IP Address: Specify the Source IP address.
DSCP: Specify the DSCP value.
IP Protocol: The L4 protocol above IP. Possible values are ICMP, IGMP, TCP, and UDP.
ICMP Type: Specify the ICMP packet type.
ICMP Code: Specify the ICMP packet Code.
IGMP Type: Specify the IGMP packet type.
Source Port: Specify the TCP or UDP source port value.
Destination Port: Specify the TCP or UDP destination port value.
TCP Flag: Specify the TCP flag value.
Ports: Specify the switch ports that you want to implement the access rule to.
Action: Specify the ACL forwarding action matching the rule criteria. Permit forwards packets if all
other ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Apply to make it effective.
Figure 89 – Add Access Rule
54
D-Link Web Smart Switch User Manual