Memorex MB123OM Manual page 8

.The input sequence is: Enable/Disable. Hour. Minute
.Press UP or DOWN to enable or disable the alarm, and adjust
the hour and minute values
.Press ENTER to confirm each value
.If the alarm is disabled, the entry process ends
.If the alarm is enabk3d, continue setting by pressing UP or DOWN
to increase or decrease the hour and minute value.
.Press ERASE to edit the previously set value.
.After pressing ENTER to confirm the "minute", the entry process
ends and the alarm is enabled.
Use alarm:
.Set alarm time and enable the alarm When the alarm is enabled,
icon j)" will be shown on the display
.When the current time matches with the alarm time, the alarm
rings
.Press ENTER once to stop the sound, or ringing will last for 1
minute
F. STOPWATCH
After entering into the stop watch mode, the "stopwatch" icon and
the current counting value will be shown If it hasn't started or has
been reset, all zero will be shown
Use Stopwatch:
.Press ENTER to start or stop stopwatch.
.If the stopwatch is stopped, press ENTER to restart the counting
from when it is stopped
.When the stopwatch stops, press SET to reset it
Daily Alarm and count down timer ringing will not be heard but the
corresponding icon will stilillash as an indication