Digicom 8E4095 Features

Dual Speed Switch 8G
DESCRIPTION
8 ports 10/100 + 1 Gigabit, the most compact
switch for the maximum performances on the
cabling Cat. 5. Ideal as root switch to connect to
the server with copper Gigabit technology.
Have you a high performances server and you want
the maximum band available?
Have you a Cat. 5 cabling and you want to overcome
the 100Mbit/s limit?
You will have all this using a Dual Speed Switch 8G.
Any of the 8 ports supports the speeds of 10 or 100
Mbit/s in Autosensing mode.
One port at 1 Gigabit RJ45 on copper is available for
the direct connection to the server or as uplink to the
LAN operating at 1 Gigabit.
Speed and operating mode are automatically detected
and selected.
Any port can turn into a cross (MDI) port and is able to
automatically correct the polarity.
Just Plug & Play! No additional setting is required.
You want to control the LAN status? Just look at the
led indicators placed on the front panel and you will
know about speed, activity and status of each port.
The Networking solutions for fast and performing LANs.
For further information: international@digicom.it or http://www.digicom.it
Code: 8E4095
Ports:
8 ports RJ-45 10BaseT/100BaseTX
1 port RJ-451Gigabit on copper
Any port can automatically turn from MDI-
X to MDI (Cross)
Full-duplex switch for the connection of
10Mbit/s-100Mbit/s groups
Store and Forward technology
Separate repeater modules for Ethernet
and Fast Ethernet
CSMA/CD access
Fullspeed Filtering and Forwarding rate
4096 addresses memory
2Mbyte Buffer memory
Complies with following specifications:
IEEE 802.3 10BaseT, IEEE802.3u,
100BaseTX and IEEE802.3ab 1000BaseT
Led Indicators:
Power
PLink/Activity
10/100/1000 Mbps
Full-Duplex
Mechanical Features:
Metal chassis
Desktop version
Power supply 110-220 VAC
Custom private MIB support
Consumption 10 Watt
Size and Weight:
Size 251x37x118mm; Weight 1 Kg
Operating Features:
Working temperature: from 5 to 50 C
Humidity: between 10% and 90% non-
condensing
CE Mark, FCC A
Dual Speed Switch 8G 05.03.2003