Digicom 8E4126 Features

DESCRIPTION
Use the existing cabling to increase the
performances of your LAN up to 1 Gigabps over
copper.
Giga Switch 8 is a root switch to carry out backbones
at the maximum speed available on the UTP cabling
(Category 5E or higher).
Giga Switch 8 is the ideal solution to create
departmental areas requiring special performances,
as groups of CAD/CAM stations, Desktop Publishing
graphics, 3D modelling or high capacity servers,
where the data transfer and exchange speed is very
important.
Giga Switch 8 can manage 1.48 Gpps (pps=packet
per second) for the maximum performances of your
LAN.
Any of the 8 ports is able to automatically adjust to the
cable/ethernet device (straight or cross) without
placing cross cables, in this way you can connect any
devices: Ethernet card or Router.
The Up-link port to other hubs or switches is not more
present; you can simply use the port you prefer.
The Led indicators on the front panel inform you on
the speed and status of each port.
The Networking solutions for fast and performing LANs.
For further information: international@digicom.it or http://www.digicom.it
Giga Switch 8
Code: 8E4126
Hardware
8 ports RJ-45 10/1000 Gbps over copper
Automatic MDI/MDI-X mode on each port
10/100/1000 Mbps in Autosensing
1 serial console port DB9 DTE for local
management
Full/Half-duplex support for ports
operating at 10/100 Mbps
Full-duplex support for 1000 Mbps
Store & Forward technology
Back pressure flow control complying
IEEE 802.3x
Packet filtering and forwarding 1.48
Gpps at 1000 Mbit/s
16000 address memory
1,5Mbyte buffer memory
LED indicators
Power
1000 Mbit/s
100 Mbit/s
10 Mbit/s
Mechanical Features
Metal chassis
Desktop version
19" rack mounting kit included
Built-in Power Supply 100-240 Vac
Consumption: 50 Watt
Size and Weight
440 x 200 x 45 mm
3 Kg
Working Features
Operating temperature: from 0 to 40 C
Humidity: between 10% and 90% non-
condensing
Conformity
CE Mark
Giga Switch 8 5.03.2003