Novell SUSE LINUX ENTERPRISE DESKTOP 11 SP1 - 8-18-2010 VIRTUALIZATION WITH ZEN Manual page 62

3 Proceed with configuring the Xen configuration of the VM Guest.
52 Virtualization with Xen
FW_ROUTE="yes"
• Switch on masquerading in the firewall:
FW_MASQUERADE="yes"
• Tell the firewall, which network should be masqueraded:
FW_MASQ_NETS="192.168.100.1/32"
• Remove the networks from the masquerading exceptions:
FW_NOMASQ_NETS=""
• Finally, restart the firewall with the command:
rcSuSEfirewall2 restart
2c Add a static route to the interface of dolly. To accomplish this, add the fol-
lowing line to the end of /etc/sysconfig/network/routes:
192.168.100.1 - - dolly.0
2d Activate all changes with the command:
rcnetwork restart
3a Change the vif interface configuration for dolly as described in Section 5.3,
"Configuring a Virtual Machine by Modifying its Xend Settings" (page 37).
3b Remove the entry:
(bridge br0)
3c Add the following line to the configuration:
(vifname dolly.0)
3d Change the script that is used to set up the interface to the following:
(script /etc/xen/scripts/vif-route-ifup)