Novell LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION Manual page 62

6.2.4 Adding Virtual CD Readers (Command
1 Make sure that the virtual machine is running and the operating system has fin-
2 Insert the CD into the physical CD reader or copy the ISO image to the host.
3 In a terminal on the host, enter the appropriate command
4 If running full virtualization mode, rebooting the virtual machine is obligatory.
52 Virtualization with Xen
Line Method)
ished booting.
• To set up an ISO image file, enter:
xm block-attach vm_id file:/mycd.iso hdc:cdrom r
where vm_id is the virtual machine ID, mycd.iso is the path to the ISO
image file, and hdc is the drive designation presented to the virtual machine.
If the virtual machine is paravirtual, replace the device designation with a
vdb x device designation, such as
xm block-attach vm_id file:/mycd.iso xvdb:cdrom r
• To set up a physical CD reader, enter:
xm block-attach vm_id phy:/dev/cdrom hdc:cdrom r
where vm_id is the virtual machine ID, /dev/cdrom is the path to the
physical CD reader, hdc is the physical drive designation to be presented
to the virtual machine, and cdrom is the name you specify for the device.
If the virtual machine is paravirtual, replace the hdc drive designation with
a vdb x drive designation, such as
xm block-attach vm_id phy:/dev/cdrom xvdb:cdrom r