Networkmanager And Scpm - Novell LINUX ENTERPRISE DESKTOP 10 SP2 - GNOME 08-05-2008 Manual

5 Click Finish to close the Network Card Configuration Overview window.
If you want to use a dial-up connection, configure your modem in Network Devices >
Modem. To configure an internal or USB ISDN modem, select Network Devices > ISDN.
To configure an internal or USB DSL modem, select Network Devices > DSL
NOTE: Configuration of WLAN Cards
Configure supported wireless cards directly in NetworkManager.

11.2 NetworkManager and SCPM

NetworkManager cannot work together with System Configuration Profile Management
(SCPM) if SCPM also manages the network configuration. If SCPM is enabled on your
system and you want to use SCPM and NetworkManager at the same time, you must
disable the network resource in the SCPM configuration. To disable the network resource
in all your SCPM profiles:
1 In YaST, click System > Profile Manager.
2 Click Configure in the Resource Groups to open the Configuration of Resource
3 In the Resource Group list, select network and click Delete.
4 Click OK.
5 Click OK again.
6 To finish the configuration, click Close.
210 GNOME User Guide
refer to the respective section in Basic Networking in the SUSE Linux Enterprise
Desktop Deployment Guide.
Groups.