Remote Installation Or Upgrade - Novell EDIRECTORY 8.8 SP1 Installation Manual

Fully Automated Standalone Upgrade
Once the above changes are performed, compile the SPK to make a CPK using the right-click menu
option in the main component to compile (see
Compiling the SPK
Figure 1-7
This CPK is ready to be imported into the Policy distributor to be used in the upgrade at all customer
sites.
IMPORTANT: This script contains the admin username and password in clear text in a temporary
file until the server is automatically restarted and used to start nwconfig again. Soon after the script
is called, this temporary file <NDS8.NCF> and the script files are deleted permanently from the
system.

1.7.7 Remote Installation or Upgrade

During Install or Upgrade, the Installer provides the following message and prompts for user input:
"Are you installing remotely through rconsole?"
"No-Local"
"Yes-Remote"
After prompting this message, the Installation typically continues in the XServer Console displaying
options to choose the NMAS methods to be installed, followed by configuration progress.
If you are performing the installation or upgrade from a remote terminal, you will not be able to
access the XServer Console to choose the NMAS methods to be installed. In this case, you could
choose "Yes-Remote", which by default installs all NMAS methods without any further indications
in the System Console.
NOTE: The Installer will restart the server once the installation is complete.
Figure 1-7).
Installing or Upgrading Novell eDirectory on NetWare 21