Storage-Related Plug-Ins For Imanager 2.7.3; Openwbem - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

4.1.9 Storage-Related Plug-Ins for iManager 2.7.3

The Clusters plug-in (
must install the Clusters plug-in and the Storage Management plug-in (
IMPORTANT: The Storage Management plug-in module (
code required by all of the other storage-related plug-ins. Make sure that you include
storagemgmt.npm
you should install, update, or remove them all at the same time to make sure the common code
works for all plug-ins.
Other storage-related plug-ins are Novell Storage Services
(
afpmgmt.npm
and Novell Archive and Version Services (
pools as cluster resources. The other services are optional.
The Storage Related Administration Plug-ins for iManager 2.7.3 are available as a zipped download
file on the
To install or upgrade the Clusters plug-in:
1 On the iManager server, if the OES 2 version of the storage-related plug-ins are installed, or if
you upgraded this server from OES 2 Linux or NetWare 6.5 SP7, log in to iManager, then
uninstall all of the storage-related plug-ins that are currently installed, including
storagemgmt.npm
This step is necessary for upgrades only if you did not uninstall and reinstall the storage-related
plug-ins as part of the upgrade process for OES 2 SP1 Linux.
2 Copy the new .npm files into the iManager plug-ins location, manually overwriting the older
version of the plug-in in the packages folder with the newer version of the plug-in.
3 In iManager, install all of the storage-related plug-ins, or install the plug-ins you need, plus the
common code.
4 Restart Tomcat by entering the following command at a terminal console prompt:
rcnovell-tomcat5 restart
5 Restart Apache by entering the following command at a terminal console prompt.
rcapache2 restart

4.1.10 OpenWBEM

OpenWBEM must be running and configured to start using
OES 2: OpenWBEM Services Administration Guide (http://www.novell.com/documentation/oes2/
mgmt_openwbem_lx_nw/data/front.html).
The CIMOM daemons on all nodes in the business continuity cluster must be configured to bind to
all IP addresses on the server. For information, see
Bind to IP Addresses," on page
Port 5989 is the default setting for secure HTTP (HTTPS) communications. If you are using a
firewall, the port must be opened for CIMOM communications.
44 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
ncsmgmt.npm
when installing any of the others. If you use more than one of these plug-ins,
), Novell CIFS (
cifsmgmt.npm
Novell Downloads (http://www.novell.com/downloads)
.
92.
) for OES 2 SP2 Linux provides support for BCC 1.2.1. You
storagemgmt.npm
TM
), Novell Distributed File Services (
). NSS is required in order to use shared NSS
avmgmt.npm
chkconfig
Section 10.5, "Configuring CIMOM Daemons to
storagemgmt.npm
) contains common
(NSS) ( ), Novell AFP
nssmgmt.npm
dfsmgmt.npm
Web site.
. For information, see the
).
),