Adding Or Creating A Novell Apparmor Profile; Editing A Novell Apparmor Profile; Deleting A Novell Apparmor Profile - Novell APPARMOR 2.0.1 Administration Manual

4.3 Adding or Creating a Novell
To add or create a Novell AppArmor profile for an application, you can use a systemic
or stand-alone profiling method, depending on your needs. Learn more about these two
approaches in

4.4 Editing a Novell AppArmor Profile

The following steps describe the procedure for editing a Novell AppArmor profile:
1 If you are not currently logged in as root, enter su in a terminal window.
2 Enter the root password when prompted.
3 Go to the profile directory with cd /etc/apparmor.d/.
4 Enter ls to view all profiles currently installed.
5 Open the profile to edit in a text editor, such as vim.
6 Make the necessary changes then save the profile.
7 Restart Novell AppArmor by entering rcapparmor restart in a terminal
4.5 Deleting a Novell AppArmor
The following steps describe the procedure for deleting a Novell AppArmor profile.
1 If you are not currently logged in as root, enter su in a terminal window.
2 Enter the root password when prompted.
48 Novell AppArmor Administration Guide
AppArmor Profile
Section 4.6, "Two Methods of Profiling"
window.
Profile
(page 49).