2
2
1
1
The cargo net can be used behind
the rear seats (row ) when the
luggage-cover blind is not fitted, or
behind the front seats (row ).
note : when using behind the front
seats, the backrests and the seat
cushions must be folded down
(see section on rear seats).
To install :
•
Fold down the backrests of the
rear seats.
•
Position the cargo net roller over
the two rails 1 located behind
the rear seats (/3 benchseat).
The two notches 2 must be posi-
tioned over the two rails.
CARGO NeT (TOUReR)
3
•
slide the rails 1 into the notches
2 and push the roller (lengthwise)
from right to left to lock it in.
•
Put the backrests of the rear
seats back into place.
To use in row 1 :
•
Fold down the
backrests of
the rear seats.
•
Open the cov-
ers 3 of the
corresponding
high fixing locations.
•
Unroll the cargo net and posi-
tion one of the ends of the net's
metal bars in the corresponding
fixing location. Ensure that the
notch is correctly lodged in the
3
rail located inside the location 3.
•
Pull on the cargo's net's metal
bar to position the other notch in
the 2nd fixing location.
To use in row 2 :
•
Open the cov-
ers of the
c o r r e s p o n d -
ing high fixing
locations.
•
From the rear
benchseat, unroll the cargo net
by pushing it to disengage the
retaining notches.
•
Position one of the ends of the
cargo net's metal bar in the corre-
sponding fixing location. Ensure
that the notch is correctly lodged
in the rail located inside the loca-
tion .
•
Position the other notch in the
2nd fixing location and pull the
metal bar towards you.
iii
123