Advertisement
Quick Links
Download this manual
See also:
User Manual
I n s t a l l a t i o n G u i d e
I n s t a l l a t i o n G u i d e
SBT-Series
SoundBoard Transducer
Includes Installation Instructions for Models
SBT-C
for classical
SBT-E
with 1/4" endpin jack
SBT-HP
for harp & piano
TM
EQUIPPED!
®
Advertisement
Related Manuals for Fishman SBT-C
Summary of Contents for Fishman SBT-C
- Page 1 I n s t a l l a t i o n G u i d e I n s t a l l a t i o n G u i d e SBT-Series SoundBoard Transducer Includes Installation Instructions for Models SBT-C for classical SBT-E...
- Page 2 SBT Series - SoundBoard Transducer SBT Series - SoundBoard Transducer Thank you for choosing the Fishman SBT. Although it is a very simple and basic passive pick- up, the SBT will reproduce the full, natural response of your instrument. Please follow the installation instructions carefully.
- Page 3 I n s t a l l a t i o n G u i d e I n s t a l l a t i o n G u i d e 1. Determine the approximate location of the transducer by measuring about 1.5"...
- Page 4 Follow the same procedure as the Model SBT-C on page 3 to mount the pickup element. PARTS • SBT-E Pickup • 1/4" Fishman Switchjack™ stereo endpin jack • (3) Double-sided Adhesive Pads Prepare the Endblock There are two ways to widen the endpin hole to accept the endpin jack: Slow and Safe If you have the time, this is the preferred way to enlarge the endpin hole.
- Page 5 I n s t a l l a t i o n G u i d e I n s t a l l a t i o n G u i d e Note: We do not recommend this method for instruments with brittle ornamental veneers (ex: abalone) around the endblock.
- Page 6 SBT Series - SoundBoard Transducer SBT Series - SoundBoard Transducer Wiring Options with the Fishman Switchjack The Switchjack T-R-S-S (Tip/Ring/Sleeve/Switch) stereo switching endpin jack allows simultaneous stereo operation and battery switching for active pickups. This new configuration simplifies stereo wiring with many pickup combinations that were once incompatible.
- Page 7 I n s t a l l a t i o n G u i d e I n s t a l l a t i o n G u i d e Mono Wiring an SBT Series Pickup Mono Wiring an SBT Series Pickup Pickup Signal to Tip...
- Page 8 Zener Diode Ground between Ring & Sleeve Stereo Wiring with an Active Pickup Stereo Wiring with an Active Pickup Negative Battery Wire to Switch 2nd Pickup to Ring Pickup Signal Common to Tip Ground For use with the Fishman Blender System...
- Page 9 I n s t a l l a t i o n G u i d e I n s t a l l a t i o n G u i d e Fasten the Jack in the Endpin Hole Follow this sequence when installing the endpin jack: 1 - Shielding Cap 2 - First Large Hex Nut...
- Page 10 SBT-HP Installation Continued SBT-HP Installation Continued FOR HARP MOUNTING 1. The approximate pickup position will be between 1/3 and 1/2 the soundboard's length, starting at the bottom of the soundboard, 1" out from either side of the center brace. The resulting intersection of the two measurements provides a good test location for the transducer.
- Page 11 3. Allow precise volume and tone shaping with dedicated EQ. 4. Ensure compatibility with virtually any instrument level audio input available. Fishman Transducers manufactures a complete line of compatible preamps, all with 10 M W W inputs: POWERJACK - Miniature Endpin Preamp MODEL GII &...
-
Page 12: Return Policy
One (1) Year from the date of purchase. If the unit fails to function properly within the warranty period, free repair and the option of replacement or refund in the event that FISHMAN is unable to make repair are FISHMAN’s only obligations. This warranty does not cover any consequential damages or damage to the unit due to misuse, accident, or neglect.