Check All Disks - ASROCK 775Dual-880Pro Getting Started

3. A message box will pop up to prompt user that the disk array has
been deleted successfully and ask user whether to restart the
computer. Click "Yes" to restart the computer or click "No" to skip
the restarting. New setting will take effect only after restarting.
Warning:
Deleting a disk array will destroy all the data on the disk array except RAID 1.
When a RAID is deleted, the data on these two hard disk drives will be reserved.
4.

Check All Disks

You can check if all the disk drives work normally by clicking
button. After you complete the checking, a dialog window will pop up to
show each disk's current status as following picture.
Your hard disk drive must be compatible with ATA/ATAPI-5 specifications
and support SMART commands; otherwise the checking will fail.