Disassembly and Assembly Instructions
11-2. Assembly Instructions
1
Attach KEY FPCB
1. Remove the sticker of the KEY FPCB.
2. Attach the KEY FPCB standardizing guide hole.
2
< 1. INTENNA CONNECTOR 체결 >
< 3. INTENNA ASSEMBLY >
INTENNA ASSEMBLY
1. Press the intenna conector on intenna perpendicularly.
2. Attach INTENNA on PBA BRACKET.
Make sure the contact between GOLD GASKET andINTENNA CONNECTOR.
3. MIC HOLDER must be settled in INTENNA HOLE.
4. Attach the NTENNA CONNECTOR WIRE side of the PBA BRACKET. (refer to the picture)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
< 2. GOLD GASKET과 INTENNA
CONNECTOR 접촉 확인 >
< 4. INTENNA CONNECTOR WIRE 안착 >
11-6