Figure 11
Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
5.
one of the three remaining LAN ports.
Verifying Your Connection
Verify that your router is connected correctly by checking the wireless-N modem router status
lights.
•
The power light is lit after turning on the wireless-N modem router.
•
The wireless light is lit after turning on the wireless-N modem router.
•
The USB light is lit, indicating a USB connection.
•
The DSL light is lit, indicating an ADSL connection.
•
The Internet light is green, indicating you are connected to the ADSL network. (The
Internet light will not turn on until you have a valid Internet connection.)
Now, turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically. Verify the following:
•
The local lights (1 through 4) are lit for any connected computers.
Installing Your Router Manually (Advanced, Mac, and Linux Users)
D
17