Router Label; Positioning Your Wireless Router - NETGEAR DGN1000 - Wireless-N Router With Built-in DSL Modem Setup Manual

Router Label

The label on the bottom of the wireless modem router shows the router's MAC address, serial
number, security PIN, and factory default login information.
Factory Default Reset. Press for 6 seconds to reset the router
to its factory default settings.
Figure 3

Positioning Your Wireless Router

The wireless modem router lets you access your network from virtually anywhere within the
operating range of your wireless network. However, the operating distance or range of your
wireless connection can vary significantly depending on the physical placement of your router. For
example, the thickness and number of walls the wireless signal must pass through may limit the
range. For best results, place your router:
• Near the center of the area where your computers and other devices will operate, preferably
within line of sight to your wireless devices.
• Accessible to an AC power outlet and near Ethernet cables for wired computers.
• In an elevated location such as a high shelf, keeping the number of walls and ceilings between
the wireless modem router and your other devices to a minimum.
• Away from electrical devices which are potential sources of interference, such as ceiling fans,
home security systems, microwaves, or the base for a cordless phone.
Getting to Know Your Wireless Router 5