Share Your Data Connection - Motorola ATRIX HD User Manual

Atrix hd - user guide
Hide thumbs Also See for ATRIX HD:
Table of Contents

Advertisement

USB Connection
You can connect your phone to a
computer with a USB cable.
Note: The first time you use a USB
connection, your computer may indicate
that drivers are being installed. Follow any
prompts you see to complete the
installation. This may take a few minutes.
1. With the home screen showing, connect
a Motorola micro USB data cable from
your phone's micro USB port to a USB
port on your computer. Your phone
should show
Note: Make sure to connect the phone
to a high power USB port. Typically,
these are located directly on your
computer. To change the type of USB
connection if necessary, touch Apps
Settings > Storage > Menu
computer connection > Mass Storage.
in the status bar.
> USB
2.Your phone and microSD memory card
appear as two separate removable disks
on your computer.
Drag and drop files between your
computer and the phone or
microSD card folders. When you're
done, use "Safely Remove Hardware"
before disconnecting the USB cable.
Note: You can't use files on the
microSD card while your phone is
connected to the computer.

Share Your Data Connection

Your computer can access the internet
through your phone's mobile
network—you just need a USB cable.
Tip: To share a Wi-Fi connection, see
"Wi-Fi Hotspot" on page 66.
>
1. Connect your phone to your computer
using a USB cable.
Note: If your computer is running
something older than
Connect & Transfer
69

Advertisement

Table of Contents
loading

Table of Contents