Kinds Of Audio Inputs; Preamps - Fishman AG-094 Installation Manual

AG Series -
AG Series -

Kinds of Audio Inputs

Because of the lack of standardization for high impedance audio inputs, special
attention should be paid to what you are plugging into:
The AG-125 / AG-094 will sound best when plugged directly into an input with a 10
MOhm impedance; the full frequency response of the instrument is reproduced.
The AG-125 / AG-094 can also be plugged into inputs as low as 1 MOhm with
adequate results; the bass frequencies will be slightly rolled off.

Preamps

We strongly recommend using a 10 MOhm, impedance matching, buffered preamp
in conjunction with the pickup.
A matching preamp will:
1. Realize the full frequency response potential of the pickup.
2. Permit long cable runs (after the preamp) without signal deterioration.
3. Allow precise volume and tone shaping with dedicated EQ.
4. Ensure compatibility with virtually any instrument level audio input available.
Fishman Transducers manufactures a complete line of compatible
preamps, all with 10 MOhm inputs:
POWERJACK - Miniature Endpin Preamp
MODEL GII & BII - Outboard Acoustic Instrument Preamp
AGP-2 - Onboard Instrument Preamp
PRO-EQ II - 4 Band Acoustic Instrument Preamp
PRO-EQ PLATINUM - Outboard Acoustic Instrument Preamp / EQ / D.I.
DUAL PARAMETRIC D.I. - Fully Parametric Two Band Preamp / D.I.
ACOUSTIC / BASS BLENDER - 2 Channel Pickup / Mic Preamp
POCKET BLENDER - 2 Channel Pickup/Mic Preamp
Passive Guitar Pickup
Passive Guitar Pickup
12
12