Miscellaneous Control - JETWAY PT88AS - REV 1.0 User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
CPU Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is 100/33MHz **
Host/PCI Clock at Next Boot
** Current DRAM Clock is 133MHz **
DRAM Clock at next Boot
VAGP Output
VRAM Output
Chipset 2.5V
VAGP LUV Protect
VRAM LUV Protect
Dual3.3V LUV Protect
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Auto Detect PCI/DIMM Clock
This item allows you to enable/disable auto detect PCI/DIMM Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at next Boot is
This item allows you to select CPU frequency step by step increasing
The choice are: 100MHz(132MHz, 133MHz(165MHz, 166MHz(255MHz.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
The choice is either 100MHz or 133MHz or 166MHz or 200MHz.
VAGP Output
This item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V.
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V, 2.6V, 2.7V, 2.8V.
Miscellaneous Control
8X
Enabled
Disabled
100/33MHz
133MHz(By SPD)
1.6V(Default)
2.65V(Default)
2.50V(Default)
Enabled
Enabled
Disabled
F6:Optimized Defaults
35
Item Help
Menu Level >
F7:Standard Defaults