Related Manuals for Westinghouse WHI-4CUPG - Voice Activated Intercom
Summary of Contents for Westinghouse WHI-4CUPG - Voice Activated Intercom
-
Page 1: Intercom System
VOICE-ACTIVATED INTERCOM SYSTEM Owner’s Manual For Wireless Intercom Model WHI-4CUPG... - Page 2 EXPLANATION OF GRAPHIC WARNING SYMBOLS This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock. This symbol is intended to alert the user to presence important operating...
- Page 3 ☞ POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. ☞...
- Page 4 IMPORTANT SERVICE NOTES ☞ DAMAGE REQUIRING SERVICE Unplug the unit from the wall outlet and refer servicing to qualifi ed service personnel under the following conditions. ➙ If liquid has been spilled into the unit. ➙ If the unit has been exposed to water. ➙...
-
Page 5: Table Of Contents
❐ For hands-free operation or for continuous audio monitoring of a room, press the AUTO TALK button. ❐ For larger homes or offi ces additional units may be added. ❐ Compatible with all Westinghouse Intercoms (except Models WHIDBI-5C & WHI-3C900). ❐ Full one year limited warranty. -
Page 6: Intercom Components
INTERCOM COMPONENTS CHANNEL BUTTONS 1-4 Allows you to select between channels. Click one button down to select a channel. Click the button up to deselect the channel. CHANNEL INDICATORS 1-4 Indicates the selected channel. TALK INDICATOR Lights when the intercom is activated. SPEAKER Clearly transmits pure, static-free, two-way voice communication. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Plug each unit into an AC outlet. Set each intercom unit to the desired channel using one of the four CHANNEL buttons. Turn the POWER/VOLUME knob clockwise until the intercom’s POWER indicator lights. Set the VOLUME knob to mid-level. To call a unit, momentarily press the CALL button, this will produce a call tone on other intercoms set to the same channel. -
Page 8: Specifications
SPECIFICATIONS DESCRIPTION SPECIFICATION POWER SOURCE 110V-120V AC CARRIER FREQUENCY Channel A 230 KHz Channel B 260 KHz Channel C 290 KHz Channel D 200 KHz RF OUTPUT POWER 35 mW Average into a 5-ohm load AUDIO OUTPUT POWER 500 mW MODULATION METHOD Frequency Modulation (FM) TRANSMISSION AND RECEPTION...