Network Filters - D-Link DIR-865L User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC Select. T urn.MAC.Filtering.Off, Allow.MAC.addresses.
Filtering: listed.below, or Deny.MAC.addresses.listed.below
from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Schedule: Select a pre-defined or user created schedule from
the drop-down menu, or click New. Schedule to
create a new schedule. You set a specific time frame
for the MAC filter rule to be active.
D-Link DIR-865L User Manual

Network Filters

78