Starting Warm Engine; Stopping Engine - Echo SMR-2110 - 01-99 Operator's Manual

22

STARTING WARM ENGINE

The starting procedure is the same as Cold Start except DO NOT close
the choke.
WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch - Start/Run. Move Stop Switch button (A) forward
away from the STOP position.
2. Primer - Pump Bulb. Pump primer bulb (B) until fuel is visible
in the "Clear" fuel return line.
3. Start - Pull Rope. Lay the trimmer on a flat clear area and pull the
recoil starter handle (C) until the engine fires.
NOTE
If engine does not start after 4 pulls, use Cold Start Procedure.

STOPPING ENGINE

1. Release Throttle. Allow engine to idle for a minute.
2. Stop Switch - Stop. Move stop switch button (A) backward to
STOP position.
WARNING
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using trimmer
again.
NOTE
Refer to Grass Trimmer/Brush Cutter Safety Manual for proper and
safe trimming techniques.
DANGER
DANGER
A
B
C
A