TYAN TOMCAT I845GV Manual page 30

ACPI function
ACPI Suspend Type
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWRBTN
PWRON After PWR-Fail
Wake Up by PCI Card
Power On by Ring
Wake Up on LAN
USB KB Wakeup From S3
(S4)
Resume by Alarm
Enabled
Disabled
S1 (POS)
S3(STR)
S1+S3
User Define
Maximum Saving
Minimum Saving
V/H SYNC+Blank
Blank Screen
DPMS
No
Yes
Stop Grant
Power On Suspend
3
Disabled
1/2/4/8/12/20/30/40Min,
1Hour
Disabled
1,5,10,20,30,45,60Min,
1Hour
Instant-Off
Delay 4-seconds
Former-Sts
Off
On
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
30
http://www.TYAN.com
Toggles advanced power and
configuration done by OS.
Defines ACPI system suspend
mode.
Defines the type of power saving
features the system should follow.
Defines the method used to power
off graphics.
Sets the video on/off in suspend
mode.
Defines the suspend type for Stop
Grant or power on suspend.
Sets the IRQ for the used
MODEM.
Set the time period before the
system goes into suspend mode.
Defines hard drive power down
delay.
Defines the action of the power
button when pressed.
Defines whether the system will
remain off if power fails or turn on
when power is restored.
Defines whether the system can be
powered on by a PCI Card.
Defines whether the system will
wake up if the modem is dialed
into. Set for default.
Defines whether the system will
wake up by Lan. Set for default.
Enabled or disabled Wakeup from
the USB KB S3(S4)
Defines the time/date when the
system will wake up.