Front Panel Connector; Cmos Reset; Disabled/Enable Lan1 - TYAN TOMCAT I815EF User Manual

2.1 – Jumper Section
Pin outs for certain connectors are available on the Tyan website: http://www.tyan.com
2.1a Front Panel Connector (J15)
Your chassis will usually come with connectors to install onto the motherboard, such as HDD and
Power LEDs. The Front Panel Connector (J80) has been implemented for such purposes.
17 15 13 11
18 16 14 12
2.6b – CMOS Reset (JP1)
1,2: Connect these two pins together to reset the CMOS settings in case an
1 2 3
incorrect setting causes system instability or you have forgotten your system/setup
password of have just flashed your BIOS.
-
-
-
-
-
2.6c – Disable/Enable LAN1 (JP5)
Closed (default): LAN1 port is disabled.
1 2
Open: LAN1 port is enabled.
9 7 5 3
10 8 6 4
Power off the system and disconnect the power supply.
Close pins 2 and 3 on JP1
Wait about 5 seconds
Close pins 1 and 2 on JP1
Reconnect the power supply and power on the system
http://www.tyan.com
1
1,3: HD LED
2
2,4: Power LED
5,7: Reset Switch
6,8: Power Switch
11-17: Infra Red (IR) On/Off
7